Key Fob Battery Change

After a few years of daily use, the battery inside the "smart" or "intelligent" key fob remote control for the keyless entry system of a third generation Z52 (2015, 2016, 2017, 2018 and also the revised 2019, 2020, 2021, 2022, 2023 & 2024 model years) Nissan Murano can become weak or stop working entirely.

Check out my DIY tutorial for changing a dead battery in the key fob (with the compatible part number) by clicking on the text link above or the thumbnail image on the left.

Cabin Air Filter Change

If the air conditioning system in your Nissan Murano hasn't been working as well recently or the air coming out of the vents smells a bit musty or moldy, you may need to clean or change the cabin air filter element in the HVAC blower motor housing.

To view my DIY instructions for the procedure (with the compatible replacement filter part numbers) click on the text link above or the thumbnail image on the left.

Windshield Wiper Blades

If you've been having difficulty seeing out of the front windshield window of your Nissan Murano during a rain or snow storm, you probably need to change the wiper blades.

Check out my DIY directions for the procedure (with the OEM blade sizes in inches and the compatible replacement part numbers) by clicking on the text link or thumbnail picture located on the left side.

Cargo Area Light Bulb

If you need to change a burnt out cargo area light bulb near the tailgate door of your Nissan Murano (or upgrade it to a brighter LED bulb), take a look at my DIY instructions for the procedure (with the compatible replacement part number) by clicking on the text link above or the thumbnail image on the left.

Rear Wiper Blade

If you've been having trouble seeing out of the back windshield window of your third generation (2015, 2016, 2017, 2018 and the refreshed 2019, 2020, 2021, 2022, 2023 & 2024) Nissan Murano during a rain or snow storm, you probably need to change the rear wiper blade.

To view my DIY tutorial for the procedure (with the OEM blade size in inches and the compatible replacement part numbers) by clicking on the text link or thumbnail picture.

Tail Light Bulbs Change

The tail light housings of a Z52 3rd generation Nissan Murano contain the rear turn signal bulb, rear side marker light bulb and the LED brake lights.

(The reverse light bulb is located in a separate housing attached to the tailgate.)

Check out my DIY directions for the procedure (with the part numbers) by clicking on the text link above or the thumbnail image on the left.

Reverse Light Bulb

If you need to change a burnt out reverse (or "back up") light bulb in the tailgate door of your Nissan Murano, take a look at my DIY instructions for the procedure (with the compatible replacement part number) by clicking on the text link above or the thumbnail image on the left.

License Plate Light Bulbs

If you need to change a burnt out license plate light bulb located in the tailgate door for the cargo area of your Nissan Murano SUV, check out my DIY tutorial for the procedure (with the compatible replacement part number) by clicking on the text link above or the thumbnail image on the left side of this paragraph.

Engine Air Filter Change

The engine air filter element for the VQ35DE 3.5 liter V6 engine in a 3rd generation (2015, 2016, 2017, 2018 and the face-lifted 2019, 2020, 2021, 2022, 2023 & 2024) Nissan Murano should be checked or cleaned at every oil change and replaced every 30,000 miles.

To view my DIY tutorial for the procedure (with the compatible replacement part numbers), click on the text link above or the thumbnail image on the left.

Electrical Fuse Change

The best place to start when troubleshooting any electrical problem with your Nissan Murano is to check for a blown fuse or a faulty relay in either the engine bay or the interior passenger compartment electrical panels.

Take a look at my DIY instructions for the procedure by clicking on the text link above or thumbnail image on the left.

12V Car Battery Change

If you've been having trouble starting the engine in your Nissan Murano on a cold morning and the OEM 12 volt car battery is a few years old, you probably need to replace it.

Check out my DIY directions for the procedure (with the OEM group size and compatible replacement part numbers) by clicking on the text link or thumbnail image.

Headlight Bulbs Change

The headlight housings of a 3rd generation (2015, 2016, 2017, 2018 and the updated 2019, 2020, 2021, 2022, 2023 & 2024) Nissan Murano contain the low beam, high beam, front turn signal and side marker light bulbs.

To view my DIY tutorial for changing any of the bulbs (with the compatible replacement part numbers), click on the text link above or the thumbnail image on the left.

Door Panel Removal

If you would like to upgrade the OEM speakers in your Nissan Murano, you'll first need to take off the plastic interior door panels.

Take a look at my DIY steps for taking off the door panels by clicking on the text link above or the thumbnail image on the left.

Fog Light Bulb Change

If you need to change a burnt out fog light bulb in the front bumper cover of your Nissan Murano, check out my DIY instructions for the procedure (with the compatible replacement part number) by clicking on the text link above or the thumbnail image on the left.

Engine Oil Change

The best way to keep your Murano running reliably is to regularly change the motor oil and replace the oil filter on the VQ35DE 3.5 liter V6 engine.

To view my DIY oil change guide with the compatible replacement filter part numbers, click on the text link above or the thumbnail picture on the left.

Spark Plugs Change

The iridium tipped OEM spark plugs in a 3rd generation Z52 (2015, 2016, 2017, 2018 and the revised 2019, 2020, 2021, 2022, 2023 & 2024) should last up to 100,000 miles, but they should be checked before that time.

Take a look at my DIY tutorial for the procedure (with the compatible replacement part numbers) by clicking on the text link above or the thumbnail image on the left.

Front Brake Pads Change

If you've been hearing a screeching, grinding or squealing noise coming from the front of your Murano when you step on the brake pedal, you probably need to change the front brake pads.

Check out my DIY instructions for the procedure (with the compatible replacement part numbers) by clicking on the text link above or the thumbnail image on the left.

Rear Brake Pads Change

The rear brake pads on a Murano tend to last twice as long as the front pads or any where from 60,000 to over 100,000 miles depending on your unique driving conditions.

To view my DIY directions for the rear brake job, with the compatible replacement part numbers, click on the text link above or the thumbnail picture on the left.

2009-2014 Nissan Murano DIY Repair & Maintenance Guides