Toyota Yaris
Windshield Wiper Blade Replacement Guide
How to change the windshield window wiper
blade on a 3rd generation 2012-2016 Toyota Yaris with the part numbers.
2015 Yaris Windshield Wiper |
Raise Wiper Arm Off Window |
This
automotive maintenance tutorial was specifically written to assist
owners of the third generation 2012, 2013, 2014, 2015 and 2016
Toyota Yaris in changing the front windshield window wiper blade. Owners of other Toyota, Lexus or Scion vehicles such as the Corolla, Matrix, Prius, Camry, RAV4, Sienna, Tacoma, Tundra, FJ Cruiser, Venza, Highlander, Avalon, Sequoia, Land Cruiser, IS 250, ES 350, GS 350, tC, xB, xD, iQ and FR-S may also find these DIY instructions to be helpful. The OEM wiper blade size in inches is 28". A few compatible replacement wiper blades with their part numbers include the following: Bosch 28A, Anco 31-28, Champion Wipers CH-28-H, Valeo 900281B, Trico 20-280 and Toyota 85222-52212. The only tool needed to replace the windshield wiper blade is a small flathead screwdriver or a plastic pry bar tool. |
|
|
|
Pry Open Locking Tab |
Swing Open Plastic Tab |
The first step is
to lift the single wiper arm off the windshield window until it remains in
the raised position by itself. Use a small flathead screwdriver or a plastic pry bar tool to gently lift the bottom edge of the black plastic locking tab located at the center of the old wiper blade. Swing open the locking tab. |
|
Push Down Wiper Blade |
Pull Wiper Blade Off Hook |
Push the old wiper
blade down to disengage the mounting bracket from the hook at the end of the
wiper arm. Rotate the old wiper blade until it is almost perpendicular with the wiper arm. Lift the old wiper blade off the metal hook at the end of the wiper arm. |
|
Towel - Protect Glass |
Line Up Blade & Arm |
Place a towel down
on the windshield to protect the window from being cracked, chipped,
scratched or shattered just in case the metal wiper arm smacks down on to
the glass. Line up the opening in the center of the new wiper blade with the end of the wiper arm. The wiper blade should be almost perpendicular to the wiper arm with the rubber blade facing away from the car. |
|
|
|
Insert Arm In Opening |
Rotate Blade Parallel |
Pass the hook at
the end of the wiper arm through the opening in the wiper blade. Rotate the new wiper blade towards the wiper arm until they are almost parallel. |
|
Slide Bracket In To Hook |
Swing Closed Lock Tab |
Pull the wiper
blade up until it clicks securely in to the hook at the end of the wiper
arm. Swing the black plastic locking tab closed and gently pop it back in to place. Double check that the new wiper blade is securely attached to the wiper arm. |
|
Lower Wiper To Glass |
Wiper Blade Replaced |
Gently lower the
wiper arm down to the window. For the best wiper performance, I recommend thoroughly cleaning off the windshield and applying a window treatment product that will repel water such as Rain-X. For more,
check out all of my
2012-2016 Toyota Yaris DIY Repair & Maintenance Guides. |
If you found this guide to be helpful,
please consider making a small donation by clicking on the PayPal.com
"Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.) |
Copyright 2024 © PaulsTravelPictures.com
All Rights Reserved ®
Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. |
Privacy Policy About Paul & Author Contact Info