Paul's Travel Pictures

Nissan Rogue Windshield Wiper Blades Replacement Guide
How to change the windshield window wiper blades on a 2nd generation 2014 to 2018 Nissan Rogue SUV.

Main Menu            Home           Digital Cameras

Misc. Pictures            Articles            My Blog

Turn Ignition To "On"
Lift Up Stalk Twice Rapidly
Wiper Arms Service Position
This automotive maintenance tutorial was specifically written to assist owners of the second generation 2014, 2015, 2016 and the revised 2017 or 2018 model year Nissan Rogue SUV in changing the front windshield window wiper blades.

Owners of other Nissan or Infiniti vehicles such as the Murano, Altima, Titan, Versa, Sentra, Maxima, Leaf, 370Z, GT-R, Juke, Pathfinder, Armada, Patrol, Skyline, Cube, X-Trail, Xterra, Qashqai, Rogue Sport, NV200, NV400, Teana, Q50, Q70, Q60, QX30, QX50, QX56, QX60, QX70 and QX80 may also find these DIY instructions to be helpful.

The OEM wiper blades sizes in inches are as follows: Driver Side 26" and Passenger Side 17".

A few compatible replacement wiper blades with their part numbers are as follows: Bosch 26A & Bosch 17A, Michelin 8026 & Michelin 8017, Aero 26" & 17", Rain-X 5079281-1 & Rain-X 5079283-1, Trico 25-260 & Trico 25-170 and Anco C-26-UB & Anco C-17-UB.

No tools are needed to remove and install the wiper blades.

Lift Wiper Arm Off Window
Rotate Away Old Blade
Black Plastic Release Tab
To move the windshield wiper arms to the "service position" follow these steps: 1. Turn the ignition switch to the "ON" position but do not start the engine. 2. Rapidly lift the wiper stalk up twice within half a second. 3. The wiper arms should move up towards the top of the windshield. 4. Turn the ignition switch to "OFF".

Lift the wiper arm off the windshield until it remains in the raised position by itself.

Rotate the old wiper blade away from the wiper arm at a slight angle.

Locate the small black plastic tab near the center of the wiper blade.

Push In Release Tab
Pull Blade Down Off Hook
Towel - Protect Glass
Gently push in the release tab and hold it.

Slide the plastic mounting bracket on the old wiper blade down and out of the metal hook at the end of the wiper arm.

Place a towel down on the windshield to protect the window from being cracked, scratched, chipped or shattered just in case the metal wiper arm smacks down on to the glass while you are changing the wiper blade.


Line Up Bracket & Hook
Pull Blade Up In To Hook
Lower Wiper Arm
I recommend buying the Bosch 26A and Bosch 17A wiper blades since they have excellent reviews on Amazon.

Line up the plastic mounting bracket at the center of the new wiper blade with the metal hook at the end of the wiper arm.

Slide the mounting bracket up and in to the metal hook.

It should "click" securely in to place. Double check that the new wiper blade is secure before moving on to the next steps.

Turn Ignition To "ON"
Lift Wiper Stalk Up Once
Wiper Blades Replaced
Turn the ignition switch to the "ON" position. Lift the wiper stalk up to the mist position one time.

The wiper arms should lower down to their resting position at the bottom of the windshield.

For the best wiper performance, I recommend thoroughly cleaning off the window and applying a glass treatment product that repels water such as Rain-X.

For more, check out all of my 2014-2018 Nissan Rogue DIY Repair & Maintenance Guides.

If you found this guide to be helpful, please consider making a small donation by clicking on the "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Main Menu       Home       Digital Cameras

Misc. Pictures       Articles       My Blog


Copyright 2021
 All Rights Reserved

Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to

Privacy Policy     About Paul & Author Contact Info