Paul's Travel Pictures

Mitsubishi Outlander Cargo Area Light Bulb Replacement Guide
How to change a burnt out cargo area light bulb in a 3rd generation 2014 to 2021 Mitsubishi Outlander SUV.

Main Menu            Home           Digital Cameras

Misc. Pictures            Articles            My Blog

2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-001
2020 Outlander Tailgate
2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-002
Cargo Area Light Housing
2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-003
Small Notch - Rear Edge
This automotive maintenance tutorial was specifically written to assist owners of the third generation (2014, 2015, 2016, 2017, 2018, 2019, 2020 & 2021) Mitsubishi Outlander SUV in changing a burnt out cargo area light bulb located in the housing attached to the headliner just in front of the tailgate door.

Owners of other Mitsubishi vehicles such as the Outlander Sport, Eclipse Cross, Mirage, Mirage G4, Lancer, ASX, Montero Sport, Pajero, Xpander, Strada and RVR may also find these DIY instructions to be helpful.

The compatible replacement festoon style light bulb is part number DE3175 which is available from various manufacturers such as Sylvania, Bosch, GE and Philips.

If you'd like to have a brighter cargo area light that will also last much longer before burning out like the traditional incandescent bulb, install a DE3175 LED unit.

The OEM (original equipment manufacturer) light bulb was marked as part number Toshiba A12V8W.)

The only tool needed to remove the lens cover and access the bulb socket is either a small plastic pry bar tool or a flat head screwdriver.

The first step is to open the tailgate door to access the cargo area.

Then locate the small notch on the rear edge of the translucent plastic lens cover just in front of the "On / Off / Door" sliding switch.



 

2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-004
Insert Screwdriver
2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-005
Pry Out Lens Cover
2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-006
Lens Cover Removed
Insert the tip of a small plastic pry bar tool or a flat head screwdriver into the notch at the middle rear edge of the lens cover.

Very gently and carefully pry out the rear edge of the lens cover to release the two retaining tabs.

Try to avoid using excessive force. The lens cover's retaining clips should pop out relatively easily.

Pull out the front edge of the lens cover from the housing. There are two more retaining tabs on the front edge.

Set the lens cover aside in a safe place.

2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-007
Old Light Bulb Exposed
2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-008
Pull Back Flexible Tab
2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-009
Pull Out Old Light Bulb
If the old light bulb was recently turned on, it might still be hot enough to burn your fingers. Allow the old bulb to cool off before handling it.

Gently pull back the flexible metal electrical contact on the left (driver) side of the bulb socket.

Pull the old light bulb straight out of the socket.

2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-010
OEM Toshiba A12V8W
2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-011
Empty Bulb Socket
2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-012
Install New Light Bulb
The OEM (original equipment manufacturer) cargo area light bulb in this 2020 Outlander SEL was marked as part number Toshiba A12V8W.

Install a new number DE3175 festoon style light bulb into the socket.

If you'd like to have a brighter cargo area light that will last for much longer than the traditional incandescent bulb, install a compatible replacement DE3175 LED unit.

Make sure the new bulb is securely installed in between the two electrical contacts.

To test the new bulb, slide the switch to the "ON" position.

Tip - If you installed an LED bulb and it doesn't work, try removing the bulb from the socket, rotate it 180 degrees and push it back into the socket. Some LED bulbs are "polarized" and will only work when the "+" positive and "-" negative electrical contacts are in the correct orientation.

2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-013
Pop In Lens Cover
2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-014
Lens Cover Secured
2014-2021-Mitsubishi-Outlander-Cargo-Area-Light-Bulb-Replacement-Guide-015
Test New Light Bulb
Line up the lens cover with the light housing and gently snap it back into place.

You should feel or hear the four retaining tabs "click" securely into the opening.

I recommend sliding the "On / Off / Door" switch to the "Door" position so that the cargo light will illuminate when a passenger door or the tailgate door is opened.

Be sure to write down the bulb change in your vehicle's service records.

Please check out all of the 2014-2021 Mitsubishi Outlander DIY Repair & Maintenance Guides.
 

If you found this guide to be helpful, please consider making a small donation by clicking on the PayPal.com "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)



 

Main Menu       Home       Digital Cameras

Misc. Pictures       Articles       My Blog

 

Copyright 2021 PaulsTravelPictures.com
 All Rights Reserved

Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Privacy Policy     About Paul & Author Contact Info