Mazda CX-5
Smart Key Fob Battery Replacement Guide
How to change the battery in the
intelligent key fob remote control for a 2nd generation 2017 to 2022 Mazda CX-5.
2019 CX-5 Smart Fob |
Back Side of Key Fob |
Ignition Key Release |
This automotive
maintenance tutorial was specifically written to assist owners of the second
generation (2017, 2018, 2019, 2020, 2021 and 2022) Mazda CX-5 SUV in
changing the battery in the "smart" or "intelligent" key fob remote control
for the "Advanced Keyless Entry System".
Owners of other Mazda vehicles such as the CX-3, CX-30, CX-7, CX-9, Mazda3, Mazda6, MX-30, MX-5 Miata, Mazda2, CX-4, CX-8 and BT-50 may also find these DIY instructions to be helpful. The compatible replacement coin cell (also known as a "button" or "watch") battery is part number CR2025 which is available from various manufacturers such as Panasonic, Duracell, Energizer, Sony, Maxell and Toshiba. The only tool needed to complete this procedure is a small flat head screwdriver such as from a precision screwdriver set (also known as a jeweler's screwdriver set). You may also be able to use a small plastic pry bar tool. The first step is turn over the fob and locate the sliding switch to release the backup / emergency metal ignition key. |
||
|
||
Slide Release Switch |
Remove Ignition Key |
Small Gap At Edge |
Gently slide the
switch to unlock the backup / emergency metal ignition key. Pull the ignition key straight out of its slot. Set the key aside in a safe place. Locate the small gap between the front and rear halves of the fob assembly. |
||
Insert Screwdriver |
Gently Pry Apart |
Separating Apart Halves |
Insert the small
flat head screwdriver in between the two halves of the fob. Very gently and carefully pry apart the fob housing. You will need to remove and re-insert the screwdriver into several locations all along the edges of the fob to fully separate the two halves. Please take your time and avoid using excessive force to prevent from cracking or breaking the plastic pieces. The two halves of the fob should pop apart relatively easily. |
||
Rear Cover Removed |
Round Battery Cover |
Pry Off Battery Cap |
Set the back cover
of the fob aside in a safe place. Locate the round black plastic battery cap. Gently pry off the battery socket cap with the small flat head screwdriver. |
||
Battery Cover Removed |
Lift Out Old Battery |
Old Battery Removed |
Set aside the round
cap aside in a safe place. Use the flat head screwdriver to carefully lift the old battery out of the socket. Try to avoid damaging the plastic retaining tabs, scratching the green circuit board or bending the metal electrical contacts. |
||
Panasonic CR2025 3V |
Key Fob Disassembled |
Lower In New Battery |
The OEM (original
equipment manufacturer) battery part number in this 2019 CX-5 was a
Panasonic CR 2025 3 volt lithium coin cell.
Orientate the new CR2025 battery with the "+" positive side facing up towards you and the "-" negative side facing down into the socket. Lower the new battery into the holder. Gently pop the new battery down into place. Make sure it is flush in the socket. |
||
Line Up Battery Cover |
Push To Secure Cap |
Line Up Back Cover |
Push the round
plastic cap over the battery socket.
The cap should "click" securely into place. Make sure the cap is fully seated. Line up the rear cover with the back side of the fob housing. |
||
Gently Snap Together |
Two Halves Secured |
Slide In Metal Ignition Key |
Gently snap
together the two halves of the fob. Check to see if the two halves of the fob are flush together at every edge. Replace the metal ignition key by sliding it straight into its slot. The ignition key should "click" securely into the slot. |
||
Fob Reassembled |
Test Key Fob Battery |
Parking Lights Flashing |
To test the new
battery, stand near your SUV and press the "Unlock" or "Lock" buttons.
If the new battery is working properly, you should see the parking lights flash, the LED headlights may turn on and you'll hear the door locks opening and closing. Note - You should not have to reprogram the key fob. Just changing the battery should not clear the original programming from the factory. Be sure to write down the procedure in your vehicle's service records. Please check out all of my
2017-2022 Mazda CX-5 DIY Repair & Maintenance Guides. |
If you found this guide to be helpful,
please consider making a small donation by clicking on the PayPal.com
"Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.) |
Copyright 2024 © PaulsTravelPictures.com
All Rights Reserved ®
Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. |