Nissan Altima Windshield
Wiper Blades Replacement Guide
How to change the front windshield window
wiper blades on a 6th gen 2019 to 2024 Nissan Altima sedan.
 2020 Altima Wiper Blades |
 Raise Wiper Arm |
 Locate Release Tab |
|
This automotive maintenance tutorial was specifically written to assist
owners of the sixth generation 2019, 2020, 2021, 2022 and the revised or "face lifted"
2023 and 2024 Nissan Altima sedan in
changing the front windshield window wiper
blades. Owners of other Nissan, Infiniti or related Renault vehicles such as the Rogue, X-Trail, Note, Versa, Rogue Sport / Qashqai, Maxima, Sentra, Juke, Kicks, Murano, Pathfinder, Armada, Frontier, Titan, Quest, NV200, Q50, Q60, QX50, QX60 and QX80 may also find these DIY instructions to be helpful. The OEM (original equipment manufacturer) wiper blade sizes in inches are as follows: Driver Side 26" and Passenger Side 17". A few compatible replacement wiper blades with their part numbers are as follows: Trico Gold 26" & 17", Bosch Icon 26A & 17A, Aero Voyager 26" & 17" and Motium 26" & 17" wiper blade set. No tools are needed to remove and replace the windshield wiper blades. The step is to raise the wiper arm off the window. Then rotate the old wiper blade away from the wiper arm until you can see the small black plastic release tab. |
||
|
|
||
 <----- Push In Tab |
 Slide Down Old Blade |
 Detach Old Blade |
| Push in the release
tab and hold it. Firmly slide the old wiper blade down out of the metal hook at the end of the wiper arm. Detach the old wiper blade from the metal wiper arm. |
||
 Metal Hook - Wiper Arm |
 Towel - Protect Glass |
 Line Up New Blade |
| Place a towel on
the windshield to protect the glass from being chipped, scratched, cracked
or shattered just in case the metal wiper arm smacks down on to the window
while you are replacing the wiper blade. Line up the plastic mounting brack at the center of the new wiper blade with the metal hook at the end of the wiper arm. I've always preferred buying the Bosch Icon 26A & 17A wiper blades since they have excellent reviews on Amazon from other Nissan owners. |
||
 Slide Up Into Hook |
 Lower Arm To Window |
 New Wiper Blade Installed |
| Slide the mounting
bracket up into the metal hook until it "clicks" securely into place. Double check that the new wiper blade is securely attached to the wiper arm. Gently lower the wiper blade back down to the windshield. For the best wiper performance, I recommend thoroughly cleaning off the windshield and applying a glass treatment product such as Rain-X which will help repel water from the glass. Don't forget to write down the wiper replacement in your vehicle's service records. Please
take a look at all of my
2019-2024 Nissan Altima DIY Repair & Maintenance Guides. |
||
If you found this guide to be helpful,
please consider making a small donation by clicking on the PayPal.com
"Donate" button located to the right of this paragraph. Thank you!
 (Note: I am not a registered charity. Donations are not tax deductible.) |