Chrysler
Pacifica Rear Wiper Blade Replacement Guide
How to change the rear window wiper blade
on a 2017, 2018 or 2019 Chrysler Pacifica minivan with the part numbers.
2017 Pacifica Rear Wiper |
Plastic Base Cap |
Swing Open Hinged Cover |
This automotive maintenance tutorial was specifically written to assist owners of the first generation (2017, 2018, 2019 and possibly also the 2020 and 2021 model years) Chrysler Pacifica minivan in changing the rear wiper blade on the back windshield window. Owners of other FCA (Fiat Chrysler America) vehicles from Chrysler, Dodge, Jeep, RAM or Fiat such as the Town & Country, 300, 200, Charger, Challenger, Durango, Journey, Grand Caravan, Wrangler, Grand Cherokee, Compass, Renegade, Patriot, RAM 1500, RAM ProMaster City, Fiat 500 and Fiat 124 may also find these DIY instructions to be helpful. The OEM rear wiper blade size in inches is 14". A few compatible replacement rear wiper blades with their part numbers include the following: Anco AR-14A, Bosch H352 and Valeo R14H. No tools are needed to detach the old wiper blade and install the new one. |
||
|
||
Raise Wiper Arm |
Rotate Away Old Blade |
Pop Bar Out of Socket |
The first step is
to gently lift up on the black plastic "C" shaped cover at the base of the
wiper arm. The cover is hinged and will swing open to the left (driver) side. Then raise the wiper arm off the back window until it remains in the raised position by itself. Rotate the old wiper blade away from the wiper arm at a slight angle. Continue gently rotating the old wiper blade until you feel the mounting bar pop out of its socket at the end of the wiper arm. |
||
Blade Perpendicular To Arm |
Pull Blade Off Arm |
Mounting Bar & Socket |
Once the old wiper
blade is perpendicular (at a 90 degree angle) to the wiper arm, slide it off
the end of the wiper arm. After the old wiper blade has been detached, you'll be able to see the "C" shaped socket at the end of the wiper arm and the mounting bar in the middle of the old wiper blade. |
||
"C" Shaped Socket |
Center of New Wiper Blade |
Line Up New Blade & Arm |
Line up the new
wiper blade with the wiper arm. I recommend buying the Anco AR-14A rear wiper blade since it has excellent reviews on Amazon. The rubber blade should be pointing out away from the rear of the minivan. |
||
|
||
Mounting Bar & Socket |
Pop Bar Into Socket |
Rotate Blade Parallel |
Insert the mounting
bar in the center of the new wiper blade into the socket at the end of the
wiper arm. Rotate the new wiper blade until it is parallel with the wiper arm. Double check that the new wiper blade is securely attached to the wiper arm. |
||
Lower Arm To Window |
Close Base Cover |
New Blade Installed |
Gently lower the
wiper arm and blade back down to the back window. Swing the hinged base cap over the mounting nut and bolt. Push on the base cap until it clicks securely into place. For the best wiper performance, I recommend thoroughly cleaning off the back windshield and applying a window treatment product that will repel water from the glass such as Rain-X. Be sure to record the wiper blade change in your vehicle's service records. For more,
check out all of my
Chrysler Pacifica Minivan DIY
Repair & Maintenance Guides. |
If you found this guide to be helpful,
please consider making a small donation by clicking on the PayPal.com
"Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.) |
Copyright 2024 © PaulsTravelPictures.com
All Rights Reserved ®
Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. |
Privacy Policy About Paul & Author Contact Info