Paul's Travel Pictures

Chevrolet Tahoe Rear Wiper Blade Replacement Guide
How to change the rear windshield window wiper blade on a 3rd generation 2007 to 2014 GM Chevy Tahoe SUV.

Main Menu            Home           Digital Cameras

Misc. Pictures            Articles            My Blog

2014 Tahoe Rear Wiper
Pull Off Plastic Cap On Base
Plastic End Cover Removed
This automotive maintenance tutorial was specifically written to assist owners of the third generation (2007, 2008, 2009, 2010, 2011, 2012, 2013 & 2014) Chevrolet Tahoe in changing the rear windshield window wiper blade.

Owners of related General Motors full size SUV vehicles with similar rear wiper arms such as the Suburban, GMC Yukon, Yukon XL, Yukon Denali, Cadillac Escalade and Hummer H2 may also find these DIY instructions to be helpful.

A replacement rear wiper blade is 12" (inches) in size.

A few compatible replacement wiper blades with their part numbers include the following.: Michelin 9512, Anco AR-12E, Trico 12-E, ACDelco 8-212E, Rain-X 850006 R12E, Bosch H300 and Silblade RB112-E.

No tools are needed to replace the rear wiper blade.

For the best results, I'd recommend using a window treatment product such as Rain-X that will help repel water.

Lift Wiper Arm Off Tail Gate
Rotate Old Wiper Blade
Pop Mounting Bar Out
The first step is to gently pull off the plastic "C" shaped cover at the base of the wiper arm.

Set the end cap aside in a safe place.

Lift the center of the wiper arm out of the stop tab attached to the tailgate.

Then pull the wiper arm away from the tail gate.

Rotate the old wiper blade away from the wiper arm until it is almost perpendicular.

Mounting Bar On Old Blade
"C" Shaped Socket On Arm
Line Up New Wiper Blade
Gently pop the mounting bar in the center of the old wiper blade out of the "C" shaped socket in the bracket at the end of the wiper arm.

I recommend buying the Trico 12-E rear wiper blade since it has excellent reviews on Amazon.

Line up the hole in the center of the new wiper blade with the end of the wiper arm.


Insert Arm Through Blade
Pop Bar In To "C" Socket
Rotate New Blade Parallel
Insert the end of the wiper arm through the hole in the wiper blade.

Snap the mounting bar in the center of the new wiper blade in to the socket on the wiper arm.

Rotate the new blade until it is parallel with the wiper arm.

Insert Stop Tab In Slot
Push Plastic Cap On Base
Rear Wiper Blade Installed
Lower the "stop tab" at the center of the wiper arm in to the slot in the bracket attached to the tail gate.

For the best results, thoroughly clean the rear window and apply a treatment product such as Rain-X or Zaino Bros Glass Polish.

For more, check out my other Chevrolet Tahoe DIY Repair Guides.

If you found this guide to be helpful, please consider making a small donation by clicking on the "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Main Menu       Home       Digital Cameras

Misc. Pictures       Articles       My Blog


Copyright 2021
 All Rights Reserved

Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to

Privacy Policy     About Paul & Author Contact Info