Paul's Travel Pictures

Jeep Patriot Fog Light Bulbs Replacement Guide
How to change a burnt out fog light bulb in the front bumper cover of a 1st generation 2007 to 2016 Jeep Patriot SUV.

Main Menu            Home           Digital Cameras

Misc. Pictures            Articles            My Blog

2016 Patriot Fog Light
Socket Under Bumper
Remove Bulb Socket
This automotive maintenance tutorial was specifically written to assist owners of the first generation (2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 & 2016) Jeep Patriot SUV in changing a burnt out fog light bulb in the front bumper cover.

Owners of other Jeep, Dodge, Chrysler, Fiat and RAM vehicles such as the Compass, Renegade, Wrangler, Grand Cherokee, Cherokee, 500, Town & Country, 200, 300, Pacifica, Challenger, Charger, Dart, Durango, Journey, Grand Caravan, RAM 1500, C/V Tradesman and ProMaster Van may also find these DIY instructions to be helpful.

The replacement fog light bulb part number is PSX24W or 2504 which are available from various manufacturers such as Philips, Eiko or Nokya.

If you would like to have brighter fog lights, install a compatible PSX24W LED bulb.

No tools are needed to access and replace the bulbs.

Disconnect Power Plug
Old Bulb Removed
PSX24W or 2504
Slide under the front bumper and locate the back of the fog light bulb housing.

To release the old light bulb, you have to squeeze or pinch together the two plastic tabs.

There is one plastic release tab on either side of the base of the old bulb.

Pull the old bulb straight out of the housing.

Press the release button on the white plastic electrical connector before sliding the power plug straight off the base of the old light bulb.

How To Squeeze Tabs
Push On Power Plug
Empty Bulb Housing
Push the power plug on to the base of the new PSX24W or 2504 light bulb.

I recommend buying the Philips 12276 bulb since it has excellent reviews on Amazon.

You can also use a brighter LED unit.

Push In New Light Bulb
New Light Bulb Installed
Test New Fog Light Bulb
Push the new fog light bulb straight in to the housing until the retaining clips click securely in to place.

Double check that the new fog light bulb is secure.

Test the new fog light bulbs by turning on the headlights and activating the fog light switch.

For more, check out my other 2007-2016 Jeep Patriot DIY Repair & Maintenance Guides.

If you found this guide to be helpful, please consider making a small donation by clicking on the "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Main Menu       Home       Digital Cameras

Misc. Pictures       Articles       My Blog


Copyright 2021
 All Rights Reserved

Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to

Privacy Policy     About Paul & Author Contact Info