LG
Refrigerator Fresh Air Filter Replacement Guide
How to check or change the fresh air filter in an LG
LMXC23746D /00 refrigerator including the compatible part numbers.
 LG MXC23746D / 00 |
 Fresh Air Filter Multi Flow |
 <~~ Open - Close ~~> |
| This home
maintenance tutorial was specifically written to assist owners of
the LG LMXC23746D / 00 household refrigerator in checking, cleaning
or replacing the fresh air filter that absorbs food odors. Owners of other LG or Kenmore Elite refrigerator model numbers such as the UPFXC2466S, LUPXS3186N, LSFD2491ST, LPXS30876D, LNXS30866D, LMXS30796D, LMXS27766S, LMX31985ST, LFXS30796D, LFXS29766S, LFX25992ST and LFX29937ST may also find these DIY instructions to be helpful. The OEM compatible replacement refrigerator filter part number is LG LT120F. No tools are needed to access and replace the fresh air filter. |
||
|
|
||
 Grasp Filter Housing |
 Twist Counterclockwise |
 Rear of Filter Housing |
| The first two steps
are to open your refrigerator door and then clear away any breakable glass
jars or ceramic dishes from in front of the fresh air filter housing. Firmly grasp the air filter housing and gently rotate it 1/4 turn counterclockwise to unlock it from the mounting bracket. Pull the filter housing off the mounting bracket. |
||
 Filter Housing Mount |
 Gently Pull Out Old Filter |
 Check Filter For Debris |
| Turn over the
filter housing to access the old air filter. Gently pull the old air filter out of the housing. Check both sides of the old filter for soiling or debris. If you are brave enough, sniff the filter to see if it smells fresh or more like the salmon and onions you've had in there during the last few months. |
||
|
|
||
 Empty Filter Bracket |
 Pop In New Filter |
 Line Up Housing & Mount |
| Line up the new
LG LT120F air filter with the "+" shaped plastic bars facing
up towards you and the plain grey face of the filter facing down in to the
housing. Gently snap the new filter in to the housing. Line up the filter housing with the mounting bracket on the rear wall of the refrigerator. Hold the filter housing at a slight angle to the left. |
||
 1/4 Turn Clockwise - Lock |
 New Filter Installed |
 Model Specification Sticker |
| Push the filter
housing on to the mounting bracket and rotate it 1/4 turn clockwise to
secure it in place. Double check that the filter housing is securely attached to the mounting bracket. Enjoy the fresh clean air in your refrigerator! If you would like to have a really fresh smelling refrigerator, I highly recommend the Arm & Hammer Fresh Fridge baking soda air filter that can be attached any where with the suction cup mount. For more, please check out my other
Home DIY Repair &
Maintenance Guides. |
||
If you found this guide to be helpful,
please consider making a small donation by clicking on the PayPal.com
"Donate" button located to the right of this paragraph. Thank you!
 (Note: I am not a registered charity. Donations are not tax deductible.) |