Paul's Travel Pictures

Mitsubishi Outlander Sport Rear Wiper Blade Replacement Guide
How to change the rear wiper blade on the back windshield of a 3rd generation 2011-2017 Mitsubishi Outlander Sport.

Main Menu            Home           Digital Cameras

Misc. Pictures            Articles            My Blog

2015 Outlander Sport Rear Wiper
Lift Arm Off Window
Rotate Away Old Blade
This automotive maintenance tutorial was specifically written to assist owners of the third generation (2011, 2012, 2013, 2014, 2015, 2016 and 2017) Mitsubishi Outlander Sport in changing the rear window wiper blade on the back windshield.

Owners of other Mitsubishi vehicles such as the Lancer, Outlander, Mirage, ASX, RVR, Galant, I-MIEV, Montero, Eclipse, 3000GT, Endeavor, Raider, Diamante, Attrage, Carisma, Colt, Grandis, Magna, Pajero and the Space Star may also find these DIY instructions to be helpful.

The OEM rear wiper blade size in inches is 10". The part number is Mitsubishi 8253A093.

One other compatible replacement 10" wiper blade part number is the Trico 10-B.

No tools are needed to replace the rear wiper blade.

Rotate Perpendicular
Pop Blade Off Wiper Arm
"C" Shaped Socket
The first step is to lift the rear wiper arm off the back window until it remains in the raised position by itself.

Then rotate the old wiper blade away from the wiper arm.

Continuing rotating the wiper blade away from the wiper arm until you can pop the mounting bar in the center of the blade out of the "C" shaped socket at the end of the wiper arm.

Pull the old wiper blade off the wiper arm.

Mounting Bar - Center
Line Up New Wiper Blade
Pass Arm Through Blade


Line up the new wiper blade with the wiper arm.

Orientate the rubber wiper blade so that it is pointing away from the back of the vehicle and towards the right (passenger) side.

Pass the end of the wiper arm through the opening in the center of the new wiper blade.

Pop Bar In To "C" Socket
Rotate Blade Parallel
Lower Arm To Window
Rotate the new wiper blade towards the wiper arm.

Firmly snap the mounting bar at the center of the new wiper blade in to the "C" shaped socket at the end of the wiper arm.

Double check that the new wiper blade is securely attached to the wiper arm.

For the best wiper performance, I recommend thoroughly cleaning off the back window and applying a glass treatment product that will repel water such as Rain-X.

For more, check out all of my 2011-2017 Mitsubishi Outlander DIY Repair & Maintenance Guides.

If you found this guide to be helpful, please consider making a small donation by clicking on the "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Main Menu       Home       Digital Cameras

Misc. Pictures       Articles       My Blog


Copyright 2023
 All Rights Reserved

Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to

Privacy Policy     About Paul & Author Contact Info