Paul's Travel Pictures

Nissan Juke Dome & Map Light Bulbs Replacement Guide
How to change a burnt out overhead dome or map light bulb in a 1st generation 2010 to 2016 Nissan Juke with pictures.

Main Menu            Home           Digital Cameras

Misc. Pictures            Articles            My Blog

2 Map Lights & Dome Light
Notch On Left Side
Gently Pry Off Lens Cover
This automotive maintenance tutorial was specifically written to assist owners of the first generation (2010, 2011, 2012, 2013, 2014, 2015 & 2016) Nissan Juke in changing a burnt out map or dome light bulb in the overhead console.

Owners of other Nissan vehicles such as the Versa, Sentra, Altima, Maxima, Cube, Leaf, Pathfinder, 370Z, Rogue, Xterra, Murano, Armada, Quest, Frontier and Titan may also find these DIY instructions to be helpful.

A replacement map or dome light bulb is part number 2825.

You may also be able to use any other miniature wedge base bulbs such as the # 168, W5W, 158, 194 or a compatible LED unit.

The only tool needed to change the bulbs is a small flathead screwdriver used to pry off the translucent plastic lens cover.

Lens Cover Removed
Pull Out Dome Light Bulb
Old # 2825 Light Bulb
To prevent from scratching the plastic surfaces, you may choose to cover the tip of your screwdriver with a thin micro fiber cloth.

Insert the blade of the small flathead screwdriver in to the notch on the left (driver) side of the translucent plastic lens cover.

Gently pry off the lens cover and set it aside in a safe place.

If the old bulbs were recently turned on, be careful since they might still be hot enough to burn your fingers.

Grasp the old bulb with your thumb and forefinger before pulling it straight out of the socket.

Empty Bulb Socket
Map Light Bulb Removed
Push In New 2825 or # 168


Push a new # 2825 bulb straight in to the socket.

You may also use any other miniature wedge base bulbs such as the # 168, W5W, 194, or a brighter LED bulb.

Push On Lens Cover
Lens Cover Replaced
Test New Light Bulbs
Line up the lens cover with the cut out holes for the "On/Off" buttons in the correct positions.

Gently snap the plastic lens cover in place.

Test the new map or dome light bulbs by flipping the rocker switches to the "On" position.

For more, check out my other Nissan Juke DIY Repair Guides.

If you found this guide to be helpful, please consider making a small donation by clicking on the "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)

Main Menu       Home       Digital Cameras

Misc. Pictures       Articles       My Blog


Copyright 2021
 All Rights Reserved

Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to

Privacy Policy     About Paul & Author Contact Info