Paul's Travel Pictures

Nissan Qashqai / Rogue Sport Rear Wiper Blade Replacement Guide
How to change the rear window wiper blade on a second generation 2014 to 2021 Nissan Qashqai or Rogue Sport SUV.

Main Menu            Home           Digital Cameras

Misc. Pictures            Articles            My Blog

Nissan-Qashqai-Rogue-Sport-Rear-Wiper-Blade-Replacement-Guide-001
2020 Rogue Sport
Nissan-Qashqai-Rogue-Sport-Rear-Wiper-Blade-Replacement-Guide-002
Rear Window Wiper Blade
Nissan-Qashqai-Rogue-Sport-Rear-Wiper-Blade-Replacement-Guide-003
Lift Arm Off Glass
This automotive maintenance tutorial was specifically written to assist owners of the second generation 2014, 2015, 2016, 2017, 2018, 2019, 2020 and 2021 Nissan Qashqai and the 2017, 2018, 2019, 2020 and 2021 Nissan Rogue Sport (USA) in changing the rear wiper blade on the back windshield window.

Owners of other Nissan, Infiniti or related Renault vehicles such as the Rogue, X-Trail, Note, Versa, Altima, Maxima, Sentra, Juke, Kicks, Murano, Pathfinder, Armada, Frontier, Titan, Quest, NV200, Q50, Q60, QX50, QX60, QX80 and Renault Kadjar may also find these DIY instructions to be helpful.

The OEM (original equipment manufacturer) wiper blade size in inches is 12" and the part number is Nissan 28790-3JA0A (also known as part number B8793-RD12JNW, B87Y3-RD12J, 28790-JE20A or 28795-EL00A).

Two compatible replacement aftermarket 12" rear wiper blades with their part numbers include the following: Trico 12-J and Anco AR-12E.

No tools are required to remove and replace the wiper blade.



 

Nissan-Qashqai-Rogue-Sport-Rear-Wiper-Blade-Replacement-Guide-004
Rotate Old Wiper Blade
Nissan-Qashqai-Rogue-Sport-Rear-Wiper-Blade-Replacement-Guide-005
Pop Out Mounting Bar
Nissan-Qashqai-Rogue-Sport-Rear-Wiper-Blade-Replacement-Guide-006
Old Wiper Blade Removed
Raise the wiper arm off the back windshield window.

Gently rotate the old wiper blade away from the wiper arm.

Continue slowly rotating the old wiper blade away from the wiper arm until you feel the mounting bar in the center of the blade "pop" out of the socket at the end of the arm.

Try to avoid using excessive force. The mounting bar should pop out of the socket relatively easily.

Nissan-Qashqai-Rogue-Sport-Rear-Wiper-Blade-Replacement-Guide-007
"C" Shaped Slot
Nissan-Qashqai-Rogue-Sport-Rear-Wiper-Blade-Replacement-Guide-008
Wiper Blade Mounting Bar
Nissan-Qashqai-Rogue-Sport-Rear-Wiper-Blade-Replacement-Guide-009
Line Up New Wiper Blade
Line up the mounting bar in the middle of the new wiper blade with the "C" shaped socket at the end of the wiper arm.
Nissan-Qashqai-Rogue-Sport-Rear-Wiper-Blade-Replacement-Guide-010
Line Up Bar & Socket
Nissan-Qashqai-Rogue-Sport-Rear-Wiper-Blade-Replacement-Guide-011
Pop Bar Into Socket
Nissan-Qashqai-Rogue-Sport-Rear-Wiper-Blade-Replacement-Guide-012
Lower Blade To Window
Gently and carefully pop the mounting bar into the socket.

Make sure the new wiper blade is securely attached to the wiper arm.

Lower the arm down against the back windshield.

For the best wiper performance, thoroughly clean off the back windshield and apply a window treatment product that will repel water from the glass such as Rain-X.

Don't forget to write down the blade change in your SUV's service records.

Please check out all of the 2014-2021 Nissan Qashqai / Rogue Sport DIY Repair & Maintenance Guides.
 

If you found this guide to be helpful, please consider making a small donation by clicking on the PayPal.com "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)



 

Main Menu       Home       Digital Cameras

Misc. Pictures       Articles       My Blog

 

Copyright 2021 PaulsTravelPictures.com
 All Rights Reserved

Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Privacy Policy     About Paul & Author Contact Info