Paul's Travel Pictures

Nissan Qashqai / Rogue Sport Windshield Wiper Blades Replacement Guide
How to change the windshield window wiper blades on a 2nd generation 2014 to 2021 Qashqai or Rogue Sport.

Main Menu            Home           Digital Cameras

Misc. Pictures            Articles            My Blog

2020 Rogue Sport
Raise Wiper Arm
Rotate Away Old Blade
This automotive maintenance tutorial was specifically written to assist owners of the second generation 2014, 2015, 2016, 2017, 2018, 2019, 2020 and 2021 Nissan Qashqai and the 2017, 2018, 2019, 2020 and 2021 Nissan Rogue Sport (USA) in changing the front windshield window wiper blades.

Owners of other Nissan, Infiniti or related Renault vehicles such as the Rogue, X-Trail, Note, Versa, Altima, Maxima, Sentra, Juke, Kicks, Murano, Pathfinder, Armada, Frontier, Titan, Quest, NV200, Q50, Q60, QX50, QX60, QX80 and Renault Kadjar may also find these DIY instructions to be helpful.

The OEM (original equipment manufacturer) wiper blade sizes in inches are as follows: Driver Side 28" and Passenger Side 18".

A few compatible replacement wiper blades with their part numbers include the following: Rain-X 5079282-2 & Rain-X 5079275-2, Bosch 28CA & Bosch 18CA, Trico 28-9 & Trico 18-1 and Michelin 8528 & Michelin 8518.

No tools are required to remove and replace the blades.

Lift the wiper arm off the windshield until it remains in the raised position by itself.

Rotate the old wiper blade away from the wiper arm at a slight angle.


Push In Release Tab
Pull Blade Off Hook
Metal Hook - Wiper Arm
Locate the small black plastic release tab in between the wiper blade and the wiper arm.

Push in the release tab towards the metal wiper arm and hold it in place.

Gently pull the mounting bracket at the center of the old wiper blade down out of the metal hook at the end of the wiper arm.

Old Wiper Blade Detached
Towel Protect Glass
Line Up New Blade
Place a towel on the windshield to help protect the glass from being shattered, cracked, chipped or scratched just in case the wiper arm smacks down on to the window while you are replacing the wiper blade.

I usually buy the Bosch 28CA and Bosch 18CA wiper blades since I've had excellent experiences with them in the past.

Slide Mount Into Hook
Lower Arm To Window
New Blades Installed
Line up the new wiper blade with the wiper arm.

Slide the plastic mounting bracket in the middle of the new wiper blade up and into the metal hook at the end of the wiper arm.

You should feel or hear the mounting bracket "click" securely into the hook.

Double check that the new wiper blade is securely attached to the wiper arm.

Carefully lower the wiper back down to the windshield.

For the best wiper performance, I highly recommend thoroughly cleaning off the windshield and applying a window treatment product that will repel water from the glass such as Rain-X.

Be sure to write down the blade change in your SUV's service records.

Please check out all of the 2014-2021 Nissan Qashqai / Rogue Sport DIY Repair & Maintenance Guides.

If you found this guide to be helpful, please consider making a small donation by clicking on the "Donate" button located to the right of this paragraph. Thank you!
(Note: I am not a registered charity. Donations are not tax deductible.)


Main Menu       Home       Digital Cameras

Misc. Pictures       Articles       My Blog


Copyright 2021
 All Rights Reserved

Paul's Travel Pictures is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to

Privacy Policy     About Paul & Author Contact Info