CR-V Key Fob Battery

After a few years of daily use, the battery inside the combination metal ignition key and keyless entry system remote control fob of a third generation (2007, 2008, 2009, 2010 & 2011) Honda CR-V SUV can become weak or stop working entirely.

Check out my DIY tutorial for changing the battery, including the replacement part number, by clicking on the text link above or the thumbnail image to the left.

CR-V Map Light Bulbs

The overhead console of a 3rd generation Honda CR-V contains two map or "personal" lights.

If you need to change a burnt out map light bulb or upgrade them both to brighter LED units, check out my DIY instructions for the procedure by clicking on the text link above or the thumbnail image to the left.

Vanity Mirror Light Bulb

If you need to change a burnt out vanity mirror light bulb in the sun visors of your third generation Honda CR-V, check out my DIY tutorial for the procedure (including replacement part numbers) by clicking on the text link above or the thumbnail image to the left.

CR-V Cabin Air Filter

If the A/C system in your 3rd generation Honda CR-V hasn't been blowing as hard any more or smells a bit musty, you probably need to clean or change the cabin air filter element in the HVAC blower motor housing.

Check out my DIY instructions for changing the filter, including replacement part number, by clicking on the text link above or the thumbnail image to the left.

CR-V Dome Light Bulb

If you need to change a burnt out overhead dome light bulb in your third generation Honda CR-V or you'd like to upgrade the bulb to a brighter LED unit, check out my guide by clicking on the text link above or the thumbnail image to the left.

CR-V Door Panel

If you'd like to upgrade the OEM door speakers in your third generation Honda CR-V, you'll first have to take off the plastic interior door panels.

Take a look at my detailed DIY tutorial for the procedure by clicking on the text link above or the thumbnail image to the left.

CR-V Cargo Light Bulb

If you need to change a burnt out overhead cargo area or "trunk" light bulb in the back of your 3rd generation Honda CR-V check out my DIY tutorial by clicking on the text link above or the thumbnail picture to the left.

CR-V Rear Wiper Blade

If you've been having trouble seeing out of the rear windshield window of your 3rd generation Honda CR-V during a rain or snow storm, you probably need to change the wiper blade.

Check out my DIY tutorial for the procedure, including replacement part numbers, by clicking on the text link above or the thumbnail image to the left.

CR-V License Plate Light

If you need to change a burnt out license plate light bulb in the tail gate door of your third generation Honda CR-V, take a look at my DIY tutorial for the procedure by clicking on the text link above or the thumbnail picture to the left.

CR-V Tail Light Bulbs

The tail light assemblies of a 3rd generation Honda CR-V contain the brake, rear turn signal, reverse and parking light bulbs.

If you need to change any of these bulbs, check out my DIY tutorial (including replacement part numbers) by clicking on the text link above or the thumbnail picture to the left.

CR-V Headlight Bulbs

The headlight housings of a third generation Honda CR-V contain the dual filament combination low and high beam lamp, front turn signal and front side marker light bulbs.

To view my DIY tutorial for changing the headlight bulbs, including replacement part numbers, click on the text link above or the thumbnail image to the left.

CR-V Engine Air Filter

The engine air filter element in a 3rd generation Honda CR-V should be cleaned at every oil change and replaced when dirty.

The procedure should be the same or very similar for every 07-11 CR-V with any of the 2.4L inline four cylinder K-Series engines such as the K24Z1, K24Z4 and the K24Z6.

CR-V Electrical Fuses

The first step to troubleshooting any electrical problem with your third generation Honda CR-V is to check or change a blown fuse in either the engine bay or interior passenger compartment fuse panels.

Check out my DIY tutorial for the procedure by clicking on the text link above or the thumbnail image to the left.

CR-V 12V Car Battery

If your 3rd generation CR-V has been having trouble starting, especially on a cold morning, and the 12 volt car battery is a few years old, you probably need to replace it.

Click on the text link above or the thumbnail image to the left to view my DIY tutorial for changing the 12V automotive battery in the engine bay.

Honda Radio Enter Code

If you just replaced the 12V automotive battery in your 3rd generation 2007-2011 Honda CR-V and the radio is displaying the "ENTER CODE" message, you'll need to find and enter the anti-theft security code.

Check out my guide for finding the security code or retrieving the radio's serial number in order to request the code online by clicking on the link above or the thumbnail to the left.

CR-V 2.4L Spark Plugs

The iridium tipped OEM spark plugs in a 3rd generation Honda CR-V can last up to 100,000 miles, but they should be checked before that time to see how the engine is running.

The spark plug change procedure should be the same or very similar for all 07-11 CR-V vehicles with the K24Z series of engines including the K24Z1, K24Z4 and K24Z6.

CR-V Windshield Wipers

If you've been having trouble seeing out of the front window of your 3rd generation CR-V during a rain storm, you probably need to change the windshield wiper blades.

Check out my DIY tutorial for the procedure, including replacement blade sizes in inches and part numbers, by clicking on the text link above or the thumbnail image to the left.

CR-V 3rd Brake Light

If you need to change a burnt out high mount third brake light bulb in the tail gate of your third generation CR-V, check out my DIY tutorial for the procedure (including the replacement part number) by clicking on the text link above or the thumbnail image to the left.

CR-V Engine Oil Change

The best way to keep your 3rd generation Honda CR-V running reliably for many years is to regularly change the motor oil and replace the oil filter on the K24Z 2.4 liter inline four cylinder engine.

Click on the text link above or the thumbnail image to the left to view my DIY oil change tutorial including a required tools list and replacement oil filter part numbers.

CR-V Front Brake Pads

If you've been hearing a squealing, screeching or grinding sound coming from the front of your third generation CR-V when you step on the brake pedal, you probably need to change the front disc brake pads.

To view my DIY instructions for the procedure, including replacement part numbers, click on the text link above or the thumbnail image to the left.