Month: July 2014

If the A/C system in your 1st generation (2011, 2012, 2013 & 2014) Chrysler 200 sedan isn’t blowing air as hard any more, or it smells a bit funky, you probably need to clean or change the cabin air filter element in the HVAC blower motor housing. Check out my DIY tutorial for the procedure by clicking on the text link or thumbnail image below.

Chrysler 200 Cabin Air Filter Replacement Guide

The headlight assemblies of a 1st generation (2011, 2012, 2013 & 2014) Chrysler 200 sedan contain the combination low & high beam bulb, the front turn signal and the front side marker light bulbs. If you need to change any of these bulbs, check out my DIY instructions for the procedure (including replacement part numbers) by clicking on the text link or thumbnail image below.

Chrysler 200 Headlight Bulbs Replacement Guide

If you’d like to upgrade the OEM door speakers in your 1st generation (2011, 2012, 2013 & 2014) Chrysler 200 sedan, you’ll first have to take off the plastic interior door panels. Check out my complete DIY tutorial for the procedure by clicking on the text link or thumbnail image below.

Chrysler 200 Interior Door Panel Removal Guide

If you need to change a burnt out license plate light bulb in the trunk lid of your 1st generation (2011, 2012, 2013 & 2014) Chrysler 200 sedan or upgrade them both to brighter LED units, check out my DIY tutorial by clicking on the text link or thumbnail image below.

Chrysler 200 License Plate Light Bulbs Replacement Guide

If you need to change a burnt out cargo area light bulb in the trunk of your first generation (2011, 2012, 2013 & 2014) Chrysler 200 sedan, check out my DIY tutorial for the procedure by clicking on the text link or thumbnail image below.

Chrysler 200 Trunk Light Bulb Replacement Guide

If you need to change a burnt out overhead dome light bulb in your 1st generation (2011, 2012, 2013 & 2014) Chrysler 200 sedan, check out my DIY tutorial for the procedure by clicking on the text link or thumbnail image below.

Chrysler 200 Dome Light Bulb Replacement Guide

If you need to change a burnt out overhead map light bulb in your first generation (2011, 2012, 2013 & 2014) Chrysler 200, check out my DIY tutorial for the procedure (including the replacement part number) by clicking on the text link or thumbnail image below.

Chrysler 200 Map Light Bulbs Replacement Guide

After a few years of daily use, the battery inside the combination ignition key and fob remote control for the keyless entry system of a first generation (2011, 2012, 2013 & 2014) Chrysler 200 can become weak or just stop working entirely. Check out my DIY tutorial for changing the key fob battery by clicking on the text link or thumbnail image below.

Chrysler 200 Key Fob Battery Replacement Guide