Lancer Key Fob Battery

After a few years of daily use, the battery inside the key fob remote control for the keyless entry system of an eighth generation (2008, 2009, 2010, 2011, 2012, 2013, 2014 & 2015) Mitsubishi Lancer can become weak or stop working entirely.

Check out my DIY instructions for the procedure, including the replacement part number, by clicking on the text link above or the thumbnail image to the left.

Lancer Map Light Bulbs

If you need to change a burnt out map light bulb in the overhead console, or you'd like to upgrade them both with brighter LED bulbs, check out my DIY tutorial for the procedure (with the replacement part number) by clicking on the text link above or the thumbnail image to the left.

Lancer Dome Light Bulb

Lancer Cabin Air Filter

If the A/C system in your eighth generation (2008, 2009, 2010, 2011, 2012, 2013, 2014 & 2015) Mitsubishi Lancer sedan hasn't been working that well recently or the air coming out of the vents smells a bit musty, you probably need to clean or change the cabin air filter element in the HVAC blower motor housing.

Check out my DIY tutorial for the procedure (including the replacement part numbers) by clicking on the text link above or the thumbnail image to the left.

Lancer Door Panel

If you'd like to upgrade the OEM speakers in your Mitsubishi Lancer, you'll first need to take off the plastic interior door panels.

To view my DIY instructions for the procedure, click on the text link above or the thumbnail image to the left.

License Plate Light Bulbs

Lancer Tail Light Bulbs

The tail light assemblies of an eighth generation Mitsubishi Lancer sedan contain the brake, rear turn signal, side marker, parking and reverse light bulbs.

If you need to change a burnt out bulb, check out my DIY instructions for the procedure (including the replacement part numbers) by clicking on the text link above or the thumbnail image to the left.

Lancer Wiper Blades

If you've been having a difficult time seeing out of the front windshield window of your eighth generation (2008, 2009, 2010, 2011, 2012, 2013, 2014 & 2015) Mitsubishi Lancer sedan during a rain or snow storm, you probably need to change the wiper blades.

Check out my DIY instructions for the procedure (including the replacement blade sizes in inches and the part numbers) by clicking on the text link above or the thumbnail image to the left.

Lancer Engine Air Filter

The engine air filter element in a Mitsubishi Lancer with either the MIVEC 2.0 liter or 2.4L inline four cylinder motors should be cleaned at every oil change and replaced when dirty.

Take a look at my DIY tutorial for the procedure (including the replacement part numbers) by clicking on the text link above or the thumbnail image to the left.

Lancer Electrical Fuses

The best place to start when troubleshooting any electrical issue with your Mitsubishi Lancer is to check for a blown fuse or relay in either the engine bay or interior passenger compartment electrical panels.

Check out my DIY steps for the procedure, with the two fuse box locations, by clicking on the text link above or the thumbnail picture to the left.

Lancer Spark Plugs

The iridium tipped OEM spark plugs in an eighth generation Mitsubishi Lancer should last up to 100,000 miles, but they should be checked well before that mileage.

To view my DIY tutorial for the procedure, including the replacement part numbers, by clicking on the text link above or the thumbnail image to the left.

Lancer Headlight Bulbs

The headlight housings of an eighth generation (2008, 2009, 2010, 2011, 2012, 2013, 2014 & 2015) Mitsubishi Lancer contain the low beam, high beam, front turn signal and side marker light bulbs.

Check out my detailed DIY instructions for changing the bulbs, including the replacement part numbers, by clicking on the text link above or the thumbnail image to the left.

Lancer Engine Oil Change

The best way to keep your Mitsubishi Lancer running reliably for many years is to regularly change the motor oil and replace the oil filter on the MIVEC 2.0L or 2.4L engines.

Take a look at my DIY instructions for the procedure (including the replacement filter part numbers) by clicking on the text link above or the thumbnail picture to the left.

Lancer Front Brake Pads

If you've been hearing a squeaking, screeching or squealing sound coming from the front end of your Lancer when you step on the brake pedal, you probably need to change the front disc brake pads.

Check out my DIY tutorial for the procedure, including the replacement part numbers, by clicking on the text link above or the thumbnail picture to the left.